Turbopulse turbine flowmeters are precise, reliable and robust units for the volumentric flow measurement of clean low viscosity liquids.

• Long life tungsten carbide bearings
• 15 sizes from 15 to 500mm (½ to 20")
• Wide variety of process connections
  • BSP / NTP male to 50mm (2")
  • ANSI or DIN flanges
  • Hygenic tri-clamp
• Pressure to 250 bar (3675 psi)
• Standard range of - 50~120°C (-58~250°F)
• High Temperature option to 150°C (300°F)
• +/- 0.5% linearity (10:1 turndown)

Size	Flow Range
15mm (½")	0.11~1.1 m3/hr (0.5~5 gal/min.)
20mm (¾")	0.22~2.2 m3/hr (0.9~9 gal/min.)
20mm (¾")	0.4~4 m3/hr (1.8~18 gal/min.)
20mm (¾")	0.8~8m3/hr (3.6~36 gal/min.)
25mm (1")	1.6~16 m3/hr (7~70 gal/min.)
40mm (1½")	3.4~34m3/hr (15~150 gal/min.)
50mm (2")	6.8~68m3/hr (30~300 gal/min.)
80mm (3")	13.5~135m3/hr (60~600 gal/min.)
100mm (4")	27~270m3/hr (120~1200 gal/min.)
150mm (6")	55~550m3/hr (240~2400 gal/min.)
200mm (8")	110~1100m3/hr (480~4800 gal/min.)
250mm (10")	190~1900m3/hr (840~8400 gal/min.)
300mm (12")	270~2700m3/hr (1200~12,000 gal/min.)
400mm (16")	400~4000m3/hr (1800~18,000 gal/min.)
500mm (20")	700~7000m3/hr (3000~30,000 gal/min.)

Body:	304 stainless steel (1.4301) standard, 316 stainless steel (1.4401) optional
Rotor:	ANSI 431 or SS 430/410 where cast
Bearing Support:	304 stainless steel (1.4301) standard, 316 stainless steel (1.4401) optional
Bearings:	Tungsten carbide sleeves

Process Connections:	BSP or NPT male threads to 50mm (2", DN50) All sizes flanged to ANSI or DIN specifications in carbon steel, 304 or 316 stainless steel, other flange types on request
Pressure Rating:	15~250 bar (220~3675 psi)
Temperature Rating:	-50~120°C (-58~250°F) as standard, optionally to 240°C (465°F)

• Explosion proof or intrinsically safe coils
• Integral or remote high speed preset Batch Controller
• Integral or remote battery powered flow Rate Totaliser with scaled pulse output, analog and flow alarm outputs

---

Please note it is recommended to right click on the below link and select save target as.

Turbo Industrial 72dpi.pdf (120KB, 1mins @2KB/s)

Data Sheet for the Turbopulse series

Turbo Industrial.pdf (1.55MB, 13mins @2KB/s)

Data Sheet for the Turbopulse series

TP Manual.pdf (560KB, 5mins @2KB/s)

Instruction Manual for the Turbpulse Range of Turbine Meters